Standing seam metal roof with concealed fasteners on a home near Goldsboro, North Carolina

Goldsboro, NC · Wayne County

Metal Roofing in Goldsboro, NC

We install more metal in Wayne County every year — standing seam on homes around Walnut Creek and Rosewood, exposed-fastener panel on the farm shops and outbuildings out toward Patetown and Dudley. Because we're local, trim is bent to your roof and delivered without a freight wait.

5-star rated by Wayne County homeownersLicensed & fully insured

Free Goldsboro estimate

Metal Roofing quote

Fill this out and we’ll call you back today.

No obligation. We usually respond within the hour.

Why metal works well on Goldsboro homes

Two things kill asphalt here: hurricane-season wind and the summer heat that bakes an under-ventilated attic. Standing seam answers both. The panels lock together with concealed clips that let the metal move as it heats, so there are no exposed screw gaskets to dry out, and a properly fastened standing-seam system carries much higher wind ratings than a shingle roof of the same age.

It also sheds our rain. Goldsboro gets intense, short downpours, and long unbroken panel runs move that volume off the roof far faster than shingle courses do — which matters most on the lower-slope porch and addition roofs that fail early all over Wayne County.

  • Standing seam with concealed clips for homes
  • Exposed-fastener ag panel for shops, barns, garages and porches
  • Custom-bent valleys, ridge caps, rake and wall trim
  • High-temp underlayment beneath every panel
  • Wind-rated fastening patterns for coastal-plain gusts
  • Metal over existing shingles where the deck and code allow

Standing seam vs. exposed fastener in Wayne County

Standing seam costs more up front and is what we recommend on a house you intend to keep. There's nothing to re-screw in fifteen years, the fastener heads are hidden under the seam, and the finish holds color.

Exposed-fastener panel is the right economic answer on shops, barns, detached garages and porch roofs — it's what most of the agricultural buildings around Dudley, Patetown and Seven Springs wear. It does have neoprene washers that need attention down the road, and we tell customers that plainly instead of pretending the two systems are equivalent.

Local fabrication, tight details

Metal roofs leak at details, not in the field: wall tie-ins, valleys, chimney sides, and where a porch meets the main roof. Bending trim locally to the actual measurements — rather than fitting stock lengths and packing the gap with sealant — is what keeps those details dry ten years on. Every metal roof we install in Goldsboro gets site-measured trim.

Aerial view of a completed charcoal standing-seam metal roof

Real job in Goldsboro

A recent Wayne County metal install

Rosewood, Goldsboro (27530)

The problem
A low-slope rear porch roof kept failing under shingles — water sat on it after every storm and the homeowner had patched the tie-in to the main roof twice.
What we did
We stripped the porch, laid high-temp underlayment, and installed standing-seam panels with site-bent wall flashing tucked behind the siding at the tie-in rather than surface-caulked.
The result
A dry porch and a color-matched roofline. The homeowner is now planning metal for the main roof when the shingles reach the end of their life.

Start to finish

How your metal roofing in Goldsboro runs

  1. 01

    Measure and sample

    We measure the roof, talk panel profile, gauge and color, and leave samples so you can see them against your siding and brick.

  2. 02

    Written estimate

    Itemized pricing, including any decking work and the trim details, compared honestly against another asphalt roof.

  3. 03

    Fabricate and install

    Trim bent to your measurements, underlayment down, panels set and fastened to the wind pattern the roof calls for.

  4. 04

    Detail and walk

    Wall, valley and chimney details finished in metal, cleanup swept, and a walkthrough with you before we leave.

Storm damaged roof with missing shingles under a dark sky

Storm & insurance claims

We can work with your insurance

Wind and hail damage is often covered. Most homeowners pay only their deductible — we handle the paperwork and the roof.

  1. 01

    Free damage inspection

    We climb the roof, photograph every hail hit, lifted shingle and leak, and give you a written assessment.

  2. 02

    We meet your adjuster

    Our team is on site for the inspection so nothing legitimate gets missed or underpaid in the scope.

  3. 03

    Approved and installed

    Once the claim is approved we order materials, schedule the tear-off and hand back a roof that's ready for the next storm.

Start a claim — (919) 221-2024

Google reviews

Rated 5.0 by homeowners near Goldsboro

5.0 stars from 74 Google reviews across Goldsboro, Pikeville and Eastern NC. Read them all on Google.

Mike Harrah was great to work with and gave us a very fair offer.
Google reviewerGoogle review · Verified Google review
Thank you Valley Pro Roofing Inc for a next level roof installation! Beyond the high level of craftsmanship and knowledge this crew brings to the table is a level of professionalism, attention to detail and communication…
Jeremy RowseyGoogle review · 3 months ago
I recently had my roof and fascia replaced by Valley Pro Roofing here in Wayne County. I couldn't be more pleased. This has been one of the biggest projects I've had to do since buying my house. Mike, the owner, was absolutely wonderful…
Phyllis PigfordWayne County, NC · 4 months ago

Metal Roofing FAQ

Goldsboro questions we get

Call (919) 221-2024

Contact details

Valley Pro Roofing — serving Goldsboro, NC

We're a locally owned roofing contractor based in Goldsboro, NC, covering Goldsboro and the rest of Wayne County every week.

Based in
Goldsboro, NC
Serving Goldsboro & Wayne County
ZIPs: 27530, 27531, 27533, 27534
Hours
Monday – Saturday, 7:00am – 6:00pm
Emergency leaks answered after hours.
View Valley Pro Roofing on Google Maps
Call (919) 221-2024 — Free Estimate